CLARK TMX ELECTRIC CUSHION FORKLIFT
TMX 12/15S/15/17/20/25
100% Electric 36 or 48 Volt
2500/3000/3000/3500/4000/5000 lbs.
FEATURES
The TMX continues the evolution of our three-wheel design with the efficiency, low maintenance and power of a 100% AC System. This rugged yet comfortable design delivers superior capacities and the quality, dependability and maneuverability you’ve come to expect from CLARK; the inventor of the three-wheel forklift.
100% AC SYSTEM
FEWER PARTS & MINIMUM WEAR = LESS DOWNTIME = HIGHER ROI
- Enclosed, brushless smart lift lock out
- Thermal & stall protection
- One motor for both steering and hydraulics
NO BRUSHES TO CHANGE OR COMMUTATOR TO TURN…EVER
HEAVY DUTY, HIGH TORQUE DRIVE MOTOR
- Produces twice the draw bar pull of some competitors
- Climbs grades previously limited to IC trucks
STALL PROTECTION
13% INCREASED RUNTIME OVER DC EQUIVALENT
- Standard battery compartment accommodates a 1240 AH battery
- Optional battery compartment available for a full 1550 AH battery
PROVEN STEER AXLE
ADDED STRENGTH
- The standard single-tire steer axle and an optional dual-tire steer axle are made from high strength cast steel and heat treated for additional strength
PROVEN DRIVE AXLE
QUIET, DEPENDABLE OPERATION
- Incorporates spiral bevel and helical gear sets
- Design has over 20 million field hours in heavy-duty application
STANDARD HYDRAULIC PUMP CONTROL
FULLY PROGRAMMABLE
- Lift speed is fully proportional to lift lever position
PROGRAMMABLE SPEEDS
- Tilt and auxiliary functions run at programmable fixed speeds
TRACTION CONTROL
FULLY PROGRAMMABLE
- Up to 20 performance parameter settings such as acceleration, creep speed and regen braking rate can be adjusted to meet your requirements
SPEED LIMITING
- Maximum travel speed can be programmed, forward and reverse can be set independently
CONTROLLED DESCENT
- Controller senses movement – no accelerator pedal input = drive motors apply counter torque allowing the truck to slowly descend an incline in a controlled manner
RAMP START
- Added torque eliminates roll back when starting on an incline
UPRIGHT & CARRIAGE
MAXIMUM VISIBILITY
- Nested I-channel allows space for cylinders, hoses and chains
HYDRAULIC CUSHIONING VALVE
- Silent staging reduces shock and vibration
SHIMMABLE, SEALED & CANTED ROLLERS
- Carriage has 6 rollers to maximize load distribution and reduce free play
APPLICATION
Manufacturing, Warehousing, Bottling & Shipping/Receiving
| Load Capacity (lbs) | 3000, 3000, 3500, 4000, 5000 |
|---|---|
| Height Overhead Guard (in) | 83 |
| Width (in) | 40.25 |
| Right Angle Stack (in) | 67.8, 74.2, 74.2, 74.2, 76.1 |
| Outside Turning Radius (in) | 53.4, 59.8, 59.8, 59.8, 61.9 |
| Travel Speed Loaded (mph) | 9.3, 9.3, 9.3, 9.3, 7.5 |
| Power Unit | 36 Volt or 48 Volt |
Related products
CONTACT YOUR NEAREST WELCH EQUIPMENT OFFICE TODAY
ALBUQUERQUE
Welch Equipment Company
3322 Columbia NE
Albuquerque, NM 87107
(505) 822-8043
3322 Columbia NE
Albuquerque, NM 87107
(505) 822-8043
SALT LAKE
Welch Equipment Company
2181 South 3200 West
Salt Lake City, UT 84119
(801) 972-9272
2181 South 3200 West
Salt Lake City, UT 84119
(801) 972-9272
CO SPRINGS
Welch Equipment Company
4445 Northpark Dr #110
Colorado Springs, CO 80907
(719) 599-4497
4445 Northpark Dr #110
Colorado Springs, CO 80907
(719) 599-4497
