CLARK ECX ELECTRIC CUSHION FORKLIFT
ECX 20/25/30/32
100% AC Electric 36 or 48 Volt
4000/5000/6000/6500 lbs.
100% AC SYSTEM
FEWER PARTS & MINIMUM WEAR = LESS DOWNTIME = HIGHER ROI
- Enclosed, brushless smart lift lock out
- Thermal & stall protection
- One motor for both steering and hydraulics
NO BRUSHES TO CHANGE OR COMMUTATOR TO TURN…EVER
HEAVY DUTY, HIGH TORQUE DRIVE MOTOR
- Produces twice the draw bar pull of some competitors
- Climbs grades previously limited to IC trucks
STALL PROTECTION
THREE FORMS OF REGENERATIVE BRAKING
- Returns energy into the battery
PROVEN DRIVE AXLE
ONE-PIECE HOUSING
- The CLARK ED30 reduces the possibility of leaks
SMOOTH, QUIET OPERATION
- Utilizes durable helical gears
FULLY ADJUSTABLE/PROGRAMMABLE
COMPLETELY CUSTOMIZE PARAMETERS TO OPERATOR’S PREFERENCE
- Acceleration rate, decelaration rate and separate FW/RV max speed
TRACTION CONTROL
FULLY PROGRAMMABLE
- Up to 20 performance parameter settings such as acceleration, creep speed and regen braking rate can be adjusted to meet your requirements
SPEED LIMITING
- Maximum travel speed can be programmed to your requirements and if necessary, forward and reverse can be set independently
CONTROLLED DESCENT
- When the controller senses movement but no accelerator pedal input, it signals the drive motors to apply counter torque allowing the truck to slowly descend an incline in a controlled manner
RAMP START
- Added torque eliminates roll back when starting on an incline
UPRIGHT & CARRIAGE
MAXIMUM VISIBILITY
- Nested I-channel allows space for cylinders, hoses and chains
HYDRAULIC CUSHIONING VALVE
- Silent staging reduces shock and vibration
SHIMMABLE, SEALED & CANTED ROLLERS
- Carriage has 6 rollers to maximize load distribution and reduce free play
OPERATOR COMPARTMENT
FULLY ADJUSTABLE SEAT
- Molded for support with non-cinching, retractable seat belt
TILT STEERING COLUMN
- Adjust to suit operator and provides easier entry/exit
COWL MOUNTED HYDRAULIC CONTROLS
- Located and sized for ease of use
THICK MOLDED FLOOR MAT
- Reduces vibration and noise level to improve operator comfort
RUGGED CAST STEER AXLE
MAXIMUM PROTECTION
- Dual action steer cylinder and fittings are protected while allowing easy access to the components
| Load Capacity (lbs) | 4000, 5000, 6000, 6500 |
|---|---|
| Height Overhead Guard (in) | 88 |
| Width (in) | 41.9, 43.9, 43.9, 45.4 |
| Right Angle Stack (in) | 86.6, 89.7, 91.3, 96.2 |
| Outside Turning Radius (in) | 70.2, 72.6, 73.9, 78.3 |
| Travel Speed Loaded (mph) | 9.2, 9.1, 8.7, 8.0 |
| Power Unit | 36 Volt or 48 Volt |
Related products
CONTACT YOUR NEAREST WELCH EQUIPMENT OFFICE TODAY
ALBUQUERQUE
Welch Equipment Company
3322 Columbia NE
Albuquerque, NM 87107
(505) 822-8043
3322 Columbia NE
Albuquerque, NM 87107
(505) 822-8043
SALT LAKE
Welch Equipment Company
2181 South 3200 West
Salt Lake City, UT 84119
(801) 972-9272
2181 South 3200 West
Salt Lake City, UT 84119
(801) 972-9272
CO SPRINGS
Welch Equipment Company
4445 Northpark Dr #110
Colorado Springs, CO 80907
(719) 599-4497
4445 Northpark Dr #110
Colorado Springs, CO 80907
(719) 599-4497
