TAYLOR X-330SL HEAVY DUTY FORKLIFT

X-330SL

Heavy Duty Forklift

Pneumatic Tire

The X-330SL is capable of handling long duty cycles and has a lift capacity of 33,000-lbs. This model has a lowered overall height. Taylor 24-in Load Center Pneumatic Tire lift trucks are engineered to meet the needs of the following industries: Steel, Aluminum, Wood, Lumber, Concrete, Precast, Breakbulk, Intermodal, Ports, Rail and Stevedoring.

STANDARD FEATURES
    • 9.8ft Direct Lift 2-Stage Mast (113-in lowered height)
    • 100-in pin-type “C” carriage
    • 3.5-in X 8-in X 48-in pin mounted forks
    • Cummins QSB 6.7L 173Hp Tier-4 Final diesel engine
    • Donaldson dry-type air cleaner w/safety element & restriction indicator
    • Dana TE-14 4-speed powershift transmission
    • Powertrain Protection System for engine and transmission
    • Kessler D-81 planetary drive axle with wet disc brakes
    • Taylor 300 welded steel steer axle (single hydraulic cylinder design with heavy-duty

links from the cylinder ram directly to tapered roller bearing mounted spindles)

  • 12.00 X 20 – 24PR bias pneumatic drive and steer tires
CHASSIS
  • All-welded steel frame with 4 lifting eyes (lifting eyes not designed for level pick)
  • Bolted counterweight
  • Replaceable bolt-on steps and handrails
  • Lockable Fuel Cap
  • Sliding engine hood (on rollers), side service doors and removable floor panels open to expose drive train for ease of maintenance.
CAB
  • Isolation mounted open operator base with overhead guard and skyview window (includes single brake pedal, dome light, wide angle mirrors, handrails and black floor mats).
  • Adjustable black vinyl covered mechanical suspension seat w/arm rests (Seat has left 15°/right 15° rotation)
  • Multifunction Joystick mounted on adjustable arm rest (11-button command with integrated directional shift control)
  • Operator Restraint System (orange, anti-cinch seat belt with starting sequence neutral lock)
  • Operator Presence System with timed idle and neutral shutdown (5 minute default, password adjustable from 1-120 minutes by end user)
  • Taylor Integrated Control System (TICS)
  • TaylorTrak Pro – Advanced Fleet Telematics Hardware
  • 7-in touch screen color display
  • One-piece flip-down instrument panel is pre-wired to accommodate heavy-duty accessories.
  • Color and number coded wiring.
  • Dual USB charging ports
  • Hydrostatic, steer-on-demand power steering with tilt steering column
ELECTRICAL
  • 24-volt electrical system with 95 amp alternator
  • Dual heavy-duty batteries
  • Battery disconnect/lock-out switch
  • Circuit breakers with heavy duty connectors (no automotive type fuses)
  • Breaker reset switches
  • Key-type electronics switch with push button start
  • Dual electric trumpet horns (116 dBA)
  • Keyswitch-actuated amber strobe light
  • Forward actuated warning alarm
Capacity (lbs)

33000

Capacity (MT)

15

Load Center (in)

24

Wheelbase (in)

121

Engine

QSB6.7-C173 4F

Transmission

TE-14 4-sp. Powershift

Mast (ft/Type)

9.8ft Direct Lift 2-Stage Mast

Carriage Att. (in/Type)

C-100

Forks (in)

3.5x8x48

Break Type

Hydraulic

Volts

24

Tires

12.00 x 20 – 24PR

CONTACT YOUR NEAREST WELCH EQUIPMENT OFFICE TODAY

ALBUQUERQUE

Welch Equipment Company
3322 Columbia NE
Albuquerque, NM 87107
(505) 822-8043

SALT LAKE

Welch Equipment Company
2181 South 3200 West
Salt Lake City, UT 84119
(801) 972-9272

CO SPRINGS

Welch Equipment Company
4445 Northpark Dr #110
Colorado Springs, CO 80907
(719) 599-4497
Scroll to Top

We’re hiring! Click here to view our current job openings