TAYLOR X-1000RC HEAVY DUTY FORKLIFT

X-1000RC

Removable Counterweight Lift Truck

The X-1000RC, our largest heavy duty removable counterweight lift truck, is purposely built for the Port Operations Industry and is unique in its ability to be lifted into the hull of a ship to handle steel and tackle other heavy material handling needs. With a Removable Counterweight, the X-1000RC has become an invaluable piece of the Port Operations Industry. Taylor Big Red. Engineering the Ultimate Lift Truck.

STANDARD FEATURES:
  • 15-ft. ULTRA-VU 2-Stage Mast (209-in lowered height)
  • 142-in “C” Carriage with Integral Side Shift and Fork Positioners
  • 3.5-in X 25-in X 60-in pin mounted Forks
  • Volvo 12.9L TAD1371VE 388-HP (Turbocharged) Tier 4 Final Diesel Engine
  • Donaldson dry-type air cleaner w/safety element & restriction indicator (vertical air intake extension)
  • Dana TE-32 4-Speed powershift Transmission
  • Powertrain Protection System for engine and transmission
  • Axeltech PRLC-7545W HD planetary Drive Axle with Wet Disc Brakes
  • Taylor 600 welded steel Steer Axle (single hydraulic cylinder design with heavyduty links from the cylinder ram directly to tapered roller bearing mounted spindles)
  • Solid plate steer angle limitation (more contact area than bolt heads which require adjustment)
  • 18.00 X 25 – 40PR bias pneumatic drive and steer tires
CHASSIS
  • All-welded steel frame with 4 Lifting Eyes
  • Removable counterweight (45,000-lbs)
  • Replaceable bolt-on steps and handrails
  • Lockable Fuel Cap
  • Sliding engine hood (on rollers), side service doors and removable floor panels open to expose drive train for ease of maintenance.
CAB
  • Enclosed 2-door steel all-welded Cab (includes dome light, wide angle mirrors, door hold back latches with trip handles, handrails, black floor mats and is isolation mounted for noise and vibration reduction)
  • 32,000 BTU heater and interior circulation fan
  • Tinted glass with front and rear windshield wipers and front windshield washer
  • Fully adjustable air ride swivel seat with 35° of rotation (15°/20° left-right)
  • Multifunction Joystick mounted on adjustable arm rest (11-button command with integrated directional shift control)
  • Operator Restraint System (Orange, anti-cinch seat belt with starting sequence neutral lock)
  • Operator Presence System with timed idle and neutral shutdown (5 minute default, password adjustable from 1-120 minutes by end user)
  • Taylor Integrated Control System (TICS) with 7-in touch screen color display
  • One-piece flip-down instrument panel is pre-wired to accommodate heavy-duty accessories.
  • Color and number coded wiring.
  • Dual USB charging ports
  • Hydrostatic, steer-on-demand power steering with tilt steering column
ELECTRICAL
  • 24-volt electrical system with 110 amp alternator
  • Dual heavy-duty batteries
  • Battery disconnect/lock-out switch
  • Circuit breakers with heavy duty connectors (no automotive type fuses)
  • Breaker reset switches
  • Key-type anti-restart ignition switch
  • Dual electric trumpet horns (116 dBA)
  • Keyswitch-actuated amber strobe light
  • Forward and reverse-actuated warning alarms
  • (4) forward facing LED work lights (cab mounted)
  • (2) rear facing LED work lights (“A” pillar mounted)
  • (2) LED work lights (mast mounted)
VIP
  • Operators Guide
  • Maintenance and Service documentation including key circuit drawings (Serial Number Specific Parts Book is available upon request)
  • Safety Check Manual and Video
Capacity (lbs)

100000

Capacity (MT)

45

Load Center (in)

48

Wheelbase (in)

225

Engine

Volvo 12.8L-TAD1371VE-388 4F

Transmission

TE-32 4-sp. APC

Mast (ft/Type)

15 UV

Carriage Att. (in/Type)

C-142 SS

Break Type

Hydraulic

Volts

24

Tires

18.00 X 25 – 40PR

Forks (in)

3.5x25x60

CONTACT YOUR NEAREST WELCH EQUIPMENT OFFICE TODAY

ALBUQUERQUE

Welch Equipment Company
3322 Columbia NE
Albuquerque, NM 87107
(505) 822-8043

SALT LAKE

Welch Equipment Company
2181 South 3200 West
Salt Lake City, UT 84119
(801) 972-9272

CO SPRINGS

Welch Equipment Company
4445 Northpark Dr #110
Colorado Springs, CO 80907
(719) 599-4497
Scroll to Top

Headed back to work? Click here to browse our COVID-19 Workplace Safety Products