TAYLOR X-220S HEAVY DUTY FORKLIFT

X-220S

Heavy Duty Forklift

Pneumatic Tire

The X-220S is capable of handling long duty cycles and has a lift capacity of 22,000-lbs. Taylor 24-in Load Center Pneumatic Tire lift trucks are engineered to meet the needs of the following industries: Steel, Aluminum, Wood, Lumber, Concrete, Precast, Breakbulk, Intermodal, Ports, Rail and Stevedoring.

STANDARD FEATURES
  • 11-ft ULTRA-VU 2-Stage Mast (139-in lowered height)
  • 84-in Pin-type “C” Carriage
  • 2.75-in X 7-in X 48-in pin mounted Forks (2.5-in thickness for X-180S forks)
  • Cummins QSB 4.5L 173Hp Tier-4 Final diesel engine
  • Donaldson dry-type air cleaner w/safety element & restriction indicator(vertical air intake extension with TaylorMax Precleaner)
  • Dana TE-14 4-Speed powershift Transmission
  • Powertrain Protection System for engine and transmission
  • AxleTech PRC-485 planetary Drive Axle with Wet Disc Brakes
  • Taylor 300 welded steel Steer Axle (single hydraulic cylinder design with heavy-duty links from the cylinder ram directly to tapered roller bearing mounted spindles)
  • 10.00 X 20 – 24PR bias pneumatic drive and steer tires
CHASSIS
  • All-welded steel frame with 4 Lifting Eyes (lifting eyes not designed for level pick)
  • Bolted counterweight
  • Replaceable bolt-on steps and handrails
  • Lockable Fuel Cap
  • Sliding engine hood (on rollers), side service doors and removable floor panels open to expose drive train for ease of maintenance.
CAB
  • Isolation mounted open operator base with overhead guard and skyview window (includes single brake pedal, dome light, wide angle mirrors, handrails and black floor mats).
  • Adjustable Black Vinyl Covered Mechanical Suspension Seat w/Arm Rests
  • Multifunction Joystick mounted on adjustable arm rest (11-button command with integrated directional shift control)
  • Operator Restraint System (Orange, anti-cinch seat belt with starting sequence neutral lock)
  • Operator Presence System with timed idle and neutral shutdown (5 minute default,
PASSWORD ADJUSTABLE FROM 1-120 MINUTES BY END USER)
  • Taylor Integrated Control System (TICS) …see next page for additional info
  • TaylorTrak Pro – Advanced Fleet Telematics hardware
  • 7-in touch screen color display
  • One-piece flip-down instrument panel is pre-wired to accommodate heavy-duty accessories.
  • Color and number coded wiring.
  • Dual USB charging ports
  • Hydrostatic, steer-on-demand power steering with tilt steering column
ELECTRICAL
  • 4-volt electrical system with 95 amp alternator
  • Dual heavy-duty batteries
  • Battery disconnect/lock-out switch
  • Circuit breakers with heavy duty connectors (no automotive type fuses)
  • Breaker reset switches
  • Key-type electronics switch with push button start
  • Dual electric trumpet horns (116 dBA)
  • Keyswitch-actuated amber strobe light
  • Forward actuated warning alarm
VEHICLE INFORMATION PACKAGE
  • Operators Guide
  • Maintenance and Service documentation including key circuit drawings (Serial Number Specific Parts Book is available upon request)
  • Safety Check Manual and Video
Capacity (lbs)

22000

Capacity (MT)

10

Load Center (in)

24

Wheelbase (in)

101

Engine

QSB4.5-C173 4F

Transmission

TE-14 4-sp. Powershift

Mast (ft/Type)

11 UV

Carriage Att. (in/Type)

C-84

Forks (in)

2.75x7x48

Break Type

Hydraulic

Volts

24

Tires

10.00 x 20 – 18pr

CONTACT YOUR NEAREST WELCH EQUIPMENT OFFICE TODAY

ALBUQUERQUE

Welch Equipment Company
3322 Columbia NE
Albuquerque, NM 87107
(505) 822-8043

SALT LAKE

Welch Equipment Company
2181 South 3200 West
Salt Lake City, UT 84119
(801) 972-9272

CO SPRINGS

Welch Equipment Company
4445 Northpark Dr #110
Colorado Springs, CO 80907
(719) 599-4497
Scroll to Top

Headed back to work? Click here to browse our COVID-19 Workplace Safety Products