TAYLOR XB-200S ROUGH TERRAIN FORKLIFT

XB-200S

Rough Terrain Forklift

Pneumatic Tire

Taylor Machine Works’ XB Series rough terrain forklifts are the most durable, most powerful, and the most maneuverable high-capacity rough terrain forklifts available to the wood products industry. Taylor Machine Works is the only USA manufacturer who designs and builds rough terrain forklifts with 18,000 to 36,000-lb rated capacities.

STANDARD FEATURES:
  • 11-ft ULTRA-VU 2-Stage Mast (139.5-in lowered height)
  • 84-in Pin-type “C” Carriage
  • 2.75-in X 7-in X 48-in pin mounted forks (XB-200)
  • Cummins QSB 6.7L 173Hp Tier-4 Final diesel engine
  • Donaldson dry-type air cleaner w/safety element & restriction indicator (vertical air intake extension with TaylorMax Precleaner)
  • Dana TE-14 3-Speed powershift Transmission
  • Powertrain Protection System for engine and transmission
  • AxleTech PRC-1756W HD planetary Drive Axle with Wet Disc Brakes
  • Taylor HD-300 welded steel Steer Axle (single hydraulic cylinder design with heavy-duty links from the cylinder ram directly to tapered roller bearing mounted spindles)
  • 14.00 X 25 – 20 PR bias pneumatic drive tires
  • 10.00 X 20 – 16 PR bias pnuematic steer tires
CHASSIS
  • All-welded steel frame with 4 Lifting Eyes (lifting eyes not designed for level pick)
  • Bolted counterweight
  • Replaceable bolt-on steps and handrails
  • Lockable Fuel Cap
  • Hinged engine hood, side service doors and removable floor panels open to expose drive train for ease of maintenance.
CAB
  • Enclosed 2-door steel all-welded Cab (includes dome light, wide angle mirrors, door hold back latches with trip handles, handrails, black floor mats and is isolation mounted for noise and vibration reduction)
  • 32,000 BTU heater and defrost
  • Tinted glass with front, rear windshield wipers and washer
  • Fully adjustable air ride swivel seat
  • Multifunction Joystick mounted on adjustable arm rest (11-button command with integrated directional shift control)
  • Operator Restraint System (Orange, anti-cinch seat belt with starting sequence neutral lock)
  • Operator Presence System with timed idle and neutral shutdown (5 minute default, password adjustable from 1-120 minutes by end user)
  • Taylor Integrated Control System (TICS)
  • 7-in touch screen color display
  • The one-piece flip-down instrument panel is pre-wired to accommodate heavyduty accessories.
  • All wiring is color and number coded.
  • Dual USB charging ports
  • Hydrostatic, steer-on-demand power steering with tilt steering column
ELECTRICAL
  • 24-volt electrical system with 95 amp alternator
  • Dual heavy-duty batteries
  • Battery disconnect/lock-out switch
  • (4) forward facing LED work lights (cab mounted)
  • (2) rear facing LED work lights (“A” pillar mounted)
  • (2) LED work lights (mast mounted)
  • Circuit breakers with heavy duty connectors (no automotive type fuses)
  • Breaker reset switches
  • Key-type anti-restart ignition switch
  • Dual electric trumpet horns (116 dBA)
  • Keyswitch-actuated amber strobe light
  • Forward and reverse-actuated warning alarms
VIP
  • Operators Guide
  • Maintenance and Service documentation including key circuit drawings (Serial Number Specific Parts Book is available upon request)
  • Safety Check Manual and Video
Capacity (lbs)

22000

Load Center (in)

24

Wheelbase (in)

110

Engine

QSB6.7-C173 Tier 4F

Transmission

TC-32 3-sp. APC

Carriage Att. (in/type)

C-84

Forks (in)

2.75x7x48

Break Type

Hydraulic

Volts

24

Tires

Drive: 14.00x 25-20PR Steer:10.00×20-18PR

Mast (ft/Type)

11 UV

Capacity (MT)

9

CONTACT YOUR NEAREST WELCH EQUIPMENT OFFICE TODAY

ALBUQUERQUE

Welch Equipment Company
3322 Columbia NE
Albuquerque, NM 87107
(505) 822-8043

SALT LAKE

Welch Equipment Company
2181 South 3200 West
Salt Lake City, UT 84119
(801) 972-9272

CO SPRINGS

Welch Equipment Company
4445 Northpark Dr #110
Colorado Springs, CO 80907
(719) 599-4497
Scroll to Top

Headed back to work? Click here to browse our COVID-19 Workplace Safety Products